|
Miller Parts
If you are looking for performance Model A engine
parts, check out our selection. We have many hard
to get items including: Finned Side Covers for
either the “A” or “B”,
Gaskets, Tappet Caps, Wing Nuts for the rocker
cover, distributor Stands, pushrods, and roller
rocker assemblies for the cast iron heads.
 |
Miller
Leakless Water Pump
The Pump Housing and Impeller are new castings;
Stainless Steel Shaft with two sealed bearings;
Snap Rings prevent fore and aft movement
of the shaft; The gaskets, triple neoprene
waterseal, castle nut, woodruff key and
cotter pin are included.
Price: $350.00
|
 |
Miller
Transmission Adapter Kit
The kit includes an aluminum adapter plate
which mates a Borg Warner, T-5, 5-speed transmission
(14 splines on input shaft), from a 1985 through
1992, Chevy S-10, pick-up truck or Blazer
with a V-6 engine and two wheel drive, to
a Ford AA or BB truck bellhousing behind a
1928 to 1934 Ford four cylinder engine.
|
| |
5-Main
Bearing Crankshaft Girdle
For a custom billet 5-main bearing crankshaft
Price: $2,300.00
|
|
Miller
Head Gaskets
Miller Hi-Speed Head Co. makes available
technologically advanced gaskets for the
antique engine builder. The result is a
superior sealing gasket without the need
for adhesives.
|
|
Exhaust
Headers
Four 1.5" O.D. equal
length primary tubes into one 2.5"
collector
OHV - $400.00 For Ceramicote®
add: $120.00 |
| |
Weber
Carburetor Kit
Includes a 32-36mm. progressive two barrel
carburetor, intake manifold, linkage, and
air cleaner.
|
|
Rocker
Covers (Sand Cast, A-356-T6 Aluminum
Original
Miller
Unpolished - $150.00
Polished - $225.00
|
Finned
'Miller'
Unpolished - $165.00
Polished - $235.00
|
|
|
Distributor
Stand (Sand Cast, 356-T6 ALUMINUM)
Includes
gasket, setscrew, and jamb nut.
Price: $85.00
|
 |
Distributor
Drive Shaft - Long
Price: $40.00 |
| |
Press-A-Juster™
Oil filter/pressure regulator adapter
Price: $00.00 |
FOR MORE
INFORMATION OR TO ORDER YOUR HI-SPEED HEAD KIT
CALL US TODAY
Phone: (805) 647-2766
Fax: (805) 647-7578
|
